Function

You remove the pressure in the hydraulic system by loosening the screw.

But remember that there is still pressure in the brake accumulator.

Bleeding

You should from time to time bleed the hydraulic system by opening the bleed screw (no fluid will come out) and let the car idle for 5-10 minutes. Then tighten the bleed screw and lift the car up and down 5-6 times. Loosen and tighten the bleed screw again. Then put the car at it's normal height.

To remove the pressure the screw must be unscrewed 1 - 1½ turns. it must not be taken out completely, because then you could lose the ball that is located inside.

W A R N I N G

When you must turn the bleed screw with the motor running, be very careful not to get caught in the transmission belts. Stand steady and hold onto something with your right hand. Do not wear loose clothing, scarves, ties, long hair, etc.

Neither a long beard, because you can get the opposite of facial lifting...

(Is this where the expression "long face" comes from ...?)